engine code DPYD

[zlobr]

Hello, I would like to ask if the engine DPYD (VW) is yet compatible? Thank you

[admin]

It isn't officially supported, but it should be quite similar to DMGA that works partially using engine group 6 or 22 (the best depends on the correctness of the read values), as you can see here:

viewtopic.php?f=4&t=30476

but unfortunately some parameter can't be read in any group.

It seems an engine with parameter setup incompatible with all the existing setup in the app, so I can't do anything without an ecu scan with my instruments.

[zlobr]

and is there any way I could do the ECU scan a send it to you somehow? Thanks

[admin]

You should use a can-analyzer but it would create tons of logs quite useless without knowing what exactly the engine was doing when you registered them, second by second.

Have you ever used another diagnostic app capable of showing all DPF parameters? Maybe this can be a starting point.

[zlobr]

I have used Car Scanner, but it's not as good as VAG DPF

[admin]

Have you been able to read DPF parameters with CarScanner?

[zlobr]

yes, I can see if the regenration is active, and the percentage of the soot. And even some temperatures etc. When the active regeneration is running, the number stays on 100%, and when it's done it suddenly shows 20%. It kind of works, but is not as nice as the VAG dpf where you have nice graphic and all the important parameters on one screen.