VW Touareg FL 3.0TDI CVVA

Post Reply
shumic078
Posts: 4
Joined: Thu Nov 19, 2020 9:20 pm

VW Touareg FL 3.0TDI CVVA

Post by shumic078 » Thu Nov 19, 2020 9:24 pm

Hello. What group of engines is correcrly for CVVA engine (VW Touareg FL 2015 3.0TDI)? Thanks.

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by admin » Fri Nov 20, 2020 4:25 pm

Group 2 should work, but the EGR value isn't working.
Anyway try every group looking for some better setting.

shumic078
Posts: 4
Joined: Thu Nov 19, 2020 9:20 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by shumic078 » Fri Nov 20, 2020 5:03 pm

Thank you.

shumic078
Posts: 4
Joined: Thu Nov 19, 2020 9:20 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by shumic078 » Fri Nov 20, 2020 8:39 pm

In the group 10 EGR value is working.

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by admin » Sun Nov 22, 2020 2:20 pm

Very good!

Can you post a screenshot? Thanks

shumic078
Posts: 4
Joined: Thu Nov 19, 2020 9:20 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by shumic078 » Sun Nov 22, 2020 2:56 pm

Screenshot.
Attachments
Screenshot_20201119-150752_VAG DPF-01.jpeg

PetrG
Posts: 1
Joined: Fri Jul 23, 2021 9:08 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by PetrG » Sat Mar 05, 2022 4:26 pm

Hello,
Group 10 looks almost OK (just reports definitely wrong DPF percentage value in my case - MY2017 EDC17 193kW) ... is there any information i.e. ECU info from Carista/VCDS, that is necessary for DEV to create appropriate group for CVVA 3.0TDI engine? I can try to collect ...
At least I'd like to ask for clarification: What "Field Regeneration Limit Override" stands for?
What value in this field is expected to be filled? ... max. soot mass in grams or volume of DPF? I believe that percentage is calculated against this value, really dunno what to fill in in case of CVVA :(

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: VW Touareg FL 3.0TDI CVVA

Post by admin » Tue Mar 08, 2022 11:10 am

That override field can be used to force a different limit for the field regeneration. The program uses a registered value, but due to the fact that most of the supported engines have been tested by users just starting the app, the limit can be wrong in some cases. Moreover if you use the app with an engine not present in the list, you can see values on the screen but they can be wrongly calculated. For those reasons, I let the users to set a custom limit in case they see a wrong filling percentage. For example if you see the regeneration starting always at 130%, this means that the limit inside the app is too low. Usually I've seen the limit near 24 grams for 2.0 TDIs with the exceptions of California/T5/etc that have a limit to 30 grams (probably due to a bigger filter).
A recent 3.0 TDI that I've tested has the limit near to 28 grams.

Post Reply