Support for DSRB engine

[Mariano]

Hi,
I have a GOLF 8^ SERIE 2.0 TDI with DSRB engine. Is it supported?
Thanks

[admin]

At the moment I have only one feedback that confirms it works using the engine group 5, but the "oil ash" value can't be read.
Also the "regen duration" and "time since last regen" values have an issue: they show a duration 10 times than the real.
Other parameters seem ok but I can't be completely sure with only one partial feedback.

This is for the full app, if you want to use the lite app (former VAG DPF free), you'll see the first 3 fields only of which "soot mass calculated" and "distance since last regen" that are ok, and "time since last regen" with the 10x error. Not perfect, but usable.

[Mariano]

I tried but I have this error: "Communication error Impossible to communicate with the engine control unit even with OBD2 protocol."

[admin]

Seems a low quality adapter issue. What kind of adapter are you using?

[Mariano]

Carista

[admin]

This is very strange, I have no doubt about the Carista quality.
Can you send me a screenshot of the app after the connection attempt?

[Mariano]

In attachment the error message (in italian).

[admin]

We can continue by email in italian if you prefer:
applagapp@gmail.com
I need to know what exactly happen when you start the app, in particular the 4 status icons on the top-right.

[Mariano]

In attachment

[Mariano]

The app doesn't work. Do you need more info?

[admin]

This error occurs when the app can't communicate with the ECU using both full-length CAN requests and 2-bytes-long OBD2 requests.
Can you confirm that your adapter works with a generic OBD2 app?

[Mariano]

Yes, my adapter Is Carista and the app Carista works fine.

[admin]

The adapter is ok, the engine should communicate ... I don't have any idea now.
Maybe check that there isn't interference with other bluetooth devices like the car telephony bluetooth.
Otherwise I can only suppose a different protocol in the DSRB engine.