Vw engine DNAA 2021

Forum related to the free app and its specific functionalities only
Post Reply
Gser07
Posts: 2
Joined: Tue Jan 03, 2023 9:12 pm

Vw engine DNAA 2021

Post by Gser07 » Tue Jan 03, 2023 9:39 pm

Hello,

Can you confirm that the app also works on a VW T6.1 with engine code "DNAA" from 2021?

as well as whether the vgate icar pro works on this app?


thank you

User avatar
admin
Site Admin
Posts: 400
Joined: Sun Jun 02, 2019 10:58 pm

Re: Vw engine DNAA 2021

Post by admin » Wed Jan 04, 2023 2:53 pm

I have only one feedback about DNAA engine reporting that works with groups 13 and 15 but not all parameters can be read.
I'm sorry but I don't have details about it.

I don't have direct experience with iCar Pro, but I have good feedback about the iCar 2 bluetooth. Being the same brand, I think they should work in the same way.

Gser07
Posts: 2
Joined: Tue Jan 03, 2023 9:12 pm

Re: Vw engine DNAA 2021

Post by Gser07 » Sat Jan 21, 2023 3:47 pm

Hello,
purchased the paid version.
works well !
the strange thing is that the regeneration only starts when the percentage is 115-118%?
also the dpf temperature of the incoming and outgoing sensor on the dpf continues to fluctuate between 550 and 580 degrees without regeneration?

User avatar
admin
Site Admin
Posts: 400
Joined: Sun Jun 02, 2019 10:58 pm

Re: Vw engine DNAA 2021

Post by admin » Sat Jan 21, 2023 4:43 pm

A correct read doesn't mean a correct value, please post some screenshot to better understand.

I'm informed about significative differences between common TDI and those used in VAN/T6/Transporter that are bigger than the others.

4cheers
Posts: 1
Joined: Thu Mar 09, 2023 11:48 am

Re: Vw engine DNAA 2021

Post by 4cheers » Thu Mar 09, 2023 11:59 am

Gser07 wrote:
Sat Jan 21, 2023 3:47 pm
the strange thing is that the regeneration only starts when the percentage is 115-118%?
also the dpf temperature of the incoming and outgoing sensor on the dpf continues to fluctuate between 550 and 580 degrees without regeneration?
Hi,
same here. Tested with group 13. Regeneration starts when >100%, soot mass calc. approx. 30g.
Temperature during economical driving approx. 600 deg, during regeneration approx. 800-900 deg.
Time since last regeneration doesn't seem correct (much too high).

I have long experience with CRLB and CAAC. Regeneration starts after about 20g soot mass, temperature while driving with little load about 300 degrees, regeneration at 600-650 degrees.
admin wrote:
Sat Jan 21, 2023 4:43 pm
A correct read doesn't mean a correct value, please post some screenshot to better understand.
I'm informed about significative differences between common TDI and those used in VAN/T6/Transporter that are bigger than the others.
I will check the values at the DNAA with VCDS and post some screenshots.

regards,
Erik

Post Reply