Page 1 of 1

Seat leon 2.0 tdi

Posted: Mon Jul 06, 2020 10:29 am
by Freddy
Hello everyone

I have three questions about the app.

• in my screenshot how does my filter look? good health or
not?
• in the filter image, why does it have a half gray part?
• why the injector 2 and 3 it's 0 value

Thank you for you help 🙏

F.G

Re: Seat leon 2.0 tdi

Posted: Tue Jul 07, 2020 8:19 pm
by admin
Everything seems ok, but you should check the health of the filter checking the regeneration frequency.

The internal part if the filter image is dynamic, it changes depending on the soot mass filling percentage trying to replicate the real filling, so almost clear with low percentage and almost dark with high percentage.

Post injections 2 and 3 are almost always at 0 because they're used principally for the regeneration, so you should see the value different from 0 during the regeneration. Sometimes the post injection 2 is also used to reduce noise and emission, but it's a rare case.

Bye

Re: Seat leon 2.0 tdi

Posted: Wed Jul 08, 2020 1:40 pm
by Freddy
Thank you for the answer.
I 'll be aware for the regenerations and frequencies