Seat leon 2.0 tdi

Post Reply
Freddy
Posts: 2
Joined: Fri Jul 03, 2020 11:01 am

Seat leon 2.0 tdi

Post by Freddy » Mon Jul 06, 2020 10:29 am

Hello everyone

I have three questions about the app.

• in my screenshot how does my filter look? good health or
not?
• in the filter image, why does it have a half gray part?
• why the injector 2 and 3 it's 0 value

Thank you for you help 🙏

F.G
Attachments
20200706_015118_Easy-Resize.com (1).jpg

User avatar
admin
Site Admin
Posts: 150
Joined: Sun Jun 02, 2019 10:58 pm

Re: Seat leon 2.0 tdi

Post by admin » Tue Jul 07, 2020 8:19 pm

Everything seems ok, but you should check the health of the filter checking the regeneration frequency.

The internal part if the filter image is dynamic, it changes depending on the soot mass filling percentage trying to replicate the real filling, so almost clear with low percentage and almost dark with high percentage.

Post injections 2 and 3 are almost always at 0 because they're used principally for the regeneration, so you should see the value different from 0 during the regeneration. Sometimes the post injection 2 is also used to reduce noise and emission, but it's a rare case.

Bye

Freddy
Posts: 2
Joined: Fri Jul 03, 2020 11:01 am

Re: Seat leon 2.0 tdi

Post by Freddy » Wed Jul 08, 2020 1:40 pm

Thank you for the answer.
I 'll be aware for the regenerations and frequencies

Post Reply