High Press EGR Closing (%) showes unplausible value
Posted: Tue Aug 02, 2022 10:36 am
Hi,
I have been using the VAG DPF for a while with my VW T6.1 CXHA and everything was fine.
Since March 2022 the High Press EGR Closing Value is showing unplausible values in the range of -500. When closing positive values between 65 and 99 are okay as always.
There is no fault detected for the EGR with VCDS and also with VCDS values are okay. All other values are okay.
I use "Group 15" for custom engine group setting which as I said alwaysed worked perfectly fine.
VAG DPF Release 3.26.11 is installed.
Do you have any idea why this is the case / some changes in VAG DPF version / mapping of values for CXHA engine / control unit / communication connection?
Thanks for any helpful feedback or ints what I may change to get values "Back" as normal -> 0-5 when open; 60-99 when closing.
Frank.
P.S.: BTW Do you plan to enhance the functionalities of VAG DPF in terms of "alerting" if regeneration will start soon and "forcing enginge to start regeneration manuallay" as a kind of "service regeneration"? That would be a brilliant evoultion / enhancement to your tool.
I have been using the VAG DPF for a while with my VW T6.1 CXHA and everything was fine.
Since March 2022 the High Press EGR Closing Value is showing unplausible values in the range of -500. When closing positive values between 65 and 99 are okay as always.
There is no fault detected for the EGR with VCDS and also with VCDS values are okay. All other values are okay.
I use "Group 15" for custom engine group setting which as I said alwaysed worked perfectly fine.
VAG DPF Release 3.26.11 is installed.
Do you have any idea why this is the case / some changes in VAG DPF version / mapping of values for CXHA engine / control unit / communication connection?
Thanks for any helpful feedback or ints what I may change to get values "Back" as normal -> 0-5 when open; 60-99 when closing.
Frank.
P.S.: BTW Do you plan to enhance the functionalities of VAG DPF in terms of "alerting" if regeneration will start soon and "forcing enginge to start regeneration manuallay" as a kind of "service regeneration"? That would be a brilliant evoultion / enhancement to your tool.