Motor DPCA

Post Reply
JALKY22
Posts: 4
Joined: Thu Mar 24, 2022 8:13 am

Motor DPCA

Post by JALKY22 » Wed Mar 30, 2022 9:35 am

Buenos días a todos, tengo un obd icar 2 y no consigo conectarlo al coche. El tipo de motor es DPCA. Es un Seat Ateca del 2022. Si con ese obd no es compatible, agradecería que alguien me dijese cual sería compatible. Muchas gracias

GOOGLE TRANSLATION by admin:
Good morning everyone, I have an obd icar 2 and I can't connect it to the car. Engine type is DPCA. It is a Seat Ateca from 2022. If it is not compatible with that obd, I would appreciate it if someone could tell me which one would be compatible. Thank you very much

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: Motor DPCA

Post by admin » Wed Mar 30, 2022 9:57 am

It's better to write in English in this forum, I added the google translation to your message.

iCar 2 is a good adapter, I own it and it works fine.

Your engine is pretty recent and I don't have feedback about it. Using the free app, you could try to set the engine group 18 in the options menu that is for the recent DTTC engine. Anyway if it doesn't work, try also all other groups.

JALKY22
Posts: 4
Joined: Thu Mar 24, 2022 8:13 am

Re: Motor DPCA

Post by JALKY22 » Wed Mar 30, 2022 12:58 pm

I have configured all the engines and with none it works

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: Motor DPCA

Post by admin » Thu Mar 31, 2022 11:37 am

What exactly happens? Can it read at least the engine data with the pink text at the bottom of the screen?

JALKY22
Posts: 4
Joined: Thu Mar 24, 2022 8:13 am

Re: Motor DPCA

Post by JALKY22 » Sat Apr 02, 2022 6:59 pm

yes, it reads it, but I have tried with all the engine groups and none detect it. Engine type is DPCA. What obd would I use to use the app?
Attachments
Screenshot_20220325-074242_VAG DPF lite.jpg

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: Motor DPCA

Post by admin » Sat Apr 02, 2022 7:09 pm

This screenshot confirms that the communication is correct because the ECU parameters are read correctly.
This is the only engine groups that give you some value? I see the soot mass read correctly but with value 0 (that is wrong of course). All other engine groups give you "nd" only?

JALKY22
Posts: 4
Joined: Thu Mar 24, 2022 8:13 am

Re: Motor DPCA

Post by JALKY22 » Sat Apr 02, 2022 7:21 pm

I have gone one by one and in all it says the same. if you notice above where it connects with the car there is one that is in yellow. it is because it does not link with the car

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: Motor DPCA

Post by admin » Sun Apr 03, 2022 12:42 pm

Just a second: I see that your engine is a TSI so gasoline engine. This is the problem! The app works only with diesel engines with DPF system.

I tried months ago to connect to a gasoline car with GPF system but the parameters setup is completely different and I don't have possibilities to study it to introduce the compatibility.
Anyway in a gasoline engine the GPF impact should be very low because the engine should normally produce hot gas without the help of post injections. Active regenerations should be much less than a diesel DPF system.

Post Reply