CFCA Engine
Posted: Fri Feb 18, 2022 10:05 pm
I am using VAG DPF on a 2014 VW T5.1 CFCA. The app appears to be receiving live data however the DPF value remains at 62% and the soot calculation doesn't change from 15.02. also the input and out put gas temp displays 0, as does the oil ash residue.
Does this point to a fault with the ECU (no fault codes) or the app?
As some background, I have recently purchased the vehicle and it has been back to the seller 5 times to have a DPF fault repaired. They refuse to replace the DPF, despite a report from DPF Doctor.
Could changes have been made to the ECU code to prevent this data from being read with the intention of preventing the DPF warning light operating and subsequently the vehicle going into limp mode?
Thanks
Does this point to a fault with the ECU (no fault codes) or the app?
As some background, I have recently purchased the vehicle and it has been back to the seller 5 times to have a DPF fault repaired. They refuse to replace the DPF, despite a report from DPF Doctor.
Could changes have been made to the ECU code to prevent this data from being read with the intention of preventing the DPF warning light operating and subsequently the vehicle going into limp mode?
Thanks