2020 2.0 TDi EVO Engines support

Post Reply
misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

2020 2.0 TDi EVO Engines support

Post by misiakpb » Thu Nov 19, 2020 9:32 am

Hi i have new EVO engine code: DSUD.
I Will try app in few days (waiting to receive OBD adapter).
If there wil not be support for this engine, than can i help you with read data and enable support for it ?
Thank you.

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Thu Nov 19, 2020 5:23 pm

Unfortunately, remotely you can't help me.
I'd need to connect my instruments to the car.

Anyway, last engines usually work with my app, but after connecting it, you should manually try every engine group to find the best one for your engine.

Let me know

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Fri Nov 20, 2020 2:19 pm

Hi

I tried manually switch all groups. But nothing works
Tried other car (old VW Passat B7) all work OK.

Also i have VCDS (legal) and i read this data - see attached file. Maybe can help you.
https://www.dropbox.com/s/fndyapgo3kwl1zv/dpf.docx?dl=0

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Fri Nov 20, 2020 4:00 pm

During the test, have you noted if at the bottom of the screen are present ECU data? There are 4 pink texts.
Maybe if you've taken a screenshot, you could share it.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Fri Nov 20, 2020 7:35 pm

No - nothnig there
Attachments
Screenshot_20201120-165122_VAG DPF free.jpg

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Sun Nov 22, 2020 2:23 pm

And are you using an adapter already tested successfully with another car, right?

It's really strange that VAG has changed again the diagnostic requests setup :evil:

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Sun Nov 22, 2020 2:49 pm

Yes, adapter is good,tested on 2 older engines .. and working OK.
Did you download file with prinst screens ? In my post shared via dropbox ?

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Mon Nov 23, 2020 2:31 pm

Yes, I did, but it can't help me because I need to know the CANBUS raw data.

I try to find more information about your engine.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Fri Dec 18, 2020 9:21 am

Hi, did you find somethink ?

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Fri Dec 18, 2020 4:03 pm

Nothing useful for my app ... I keep searching.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Wed Feb 10, 2021 10:14 am

Hi .. no new info ? Thank You

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Wed Feb 10, 2021 4:08 pm

Still nothing, the engine is too recent and I didn't have any opportunity to test it yet.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Mon Nov 08, 2021 7:29 pm

Hi, somethink new ? about new engines ?

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Tue Nov 09, 2021 8:59 am

The last full version contains the new group 18 for DTTC 2021 engine that I tested physically.
If you're using the free version, the engine group 5 should give you readable data, but your problem is that the initialization doesn't finish correctly.

With DTTC engine I've verified that the protocol is the same, only some parameter requires a new request string.
I think that new 2021 TDI engines don't require a new protocol format, simply they need new request strings or formulas.


I think that also your DSUD engine should follow the same rule and I would suggest you to try with a better ELM adapter, but it's strange that you've tested successfully it with another car. In your case I don't know where is the problem, if in the adapter or in the app.
A possibile reason can be that new TDIs require an adapter with better quality than older TDI, but this is just a personal hypothesis.

If you don't have the possibility to use another adapter, the only thing we can do is to wait for some other feedback about DSUD engine.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Tue Nov 09, 2021 9:12 am

i have full, and it doesnt work with group 18 at all no data

Plus
Posts: 1
Joined: Fri Feb 16, 2024 1:07 pm

Re: 2020 2.0 TDi EVO Engines support

Post by Plus » Mon Feb 19, 2024 7:37 am

Hello, I tried to connect vagdpf on Leon KL1 (2.0 TDI from 2023) with engine code DTTC and it didn't connect. Also I have the release 3.29.12
Attachments
Screenshot_2024-01-19-19-04-54-622_com.applagapp.vagdpf.jpg
Screenshot_2024-01-19-19-03-42-404_com.applagapp.vagdpf.jpg

User avatar
admin
Site Admin
Posts: 473
Joined: Sun Jun 02, 2019 10:58 pm

Re: 2020 2.0 TDi EVO Engines support

Post by admin » Fri Mar 08, 2024 12:14 pm

Your ECU probably has the new 29bit initialization protocol that the app doesn't support.

misiakpb
Posts: 10
Joined: Thu Nov 19, 2020 9:28 am

Re: 2020 2.0 TDi EVO Engines support

Post by misiakpb » Wed Mar 20, 2024 1:39 pm

29bit initialization protocol - can be implemented ?

Post Reply