2020 2.0 TDi EVO Engines support

[misiakpb]

Hi i have new EVO engine code: DSUD.
I Will try app in few days (waiting to receive OBD adapter).
If there wil not be support for this engine, than can i help you with read data and enable support for it ?
Thank you.

[admin]

Unfortunately, remotely you can't help me.
I'd need to connect my instruments to the car.

Anyway, last engines usually work with my app, but after connecting it, you should manually try every engine group to find the best one for your engine.

Let me know

[misiakpb]

Hi

I tried manually switch all groups. But nothing works
Tried other car (old VW Passat B7) all work OK.

Also i have VCDS (legal) and i read this data - see attached file. Maybe can help you.
https://www.dropbox.com/s/fndyapgo3kwl1zv/dpf.docx?dl=0

[admin]

During the test, have you noted if at the bottom of the screen are present ECU data? There are 4 pink texts.
Maybe if you've taken a screenshot, you could share it.

[misiakpb]

No - nothnig there

[admin]

And are you using an adapter already tested successfully with another car, right?

It's really strange that VAG has changed again the diagnostic requests setup

[misiakpb]

Yes, adapter is good,tested on 2 older engines .. and working OK.
Did you download file with prinst screens ? In my post shared via dropbox ?

[admin]

Yes, I did, but it can't help me because I need to know the CANBUS raw data.

I try to find more information about your engine.

[misiakpb]

Hi, did you find somethink ?

[admin]

Nothing useful for my app ... I keep searching.

[misiakpb]

Hi .. no new info ? Thank You

[admin]

Still nothing, the engine is too recent and I didn't have any opportunity to test it yet.