BETA test for 29bit init protocol

[gusiak11]

This weekend I connected vgate to DTUA in Octavia 22.
I received this message
Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

*INIT LOG*
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v2.3\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415443503137G1HOK\r\r>X
41545348464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>
But finally, the program connected to the ECU and displayed the DPF status, I wonder about one thing, namely
"soot mass measured" is why it is negative
Attached is a screenshot from the phone

https://drive.google.com/file/d/1B4zxd5 ... sp=sharing

[eulogitos]

Here's a screenshot

Thanks!

Did you voluntarily disable the soot mass measured field? Maybe you clicked on it without meaning to?

After this feedback I think I have to change the commands sequence to avoid the error after the 0100 request. This should remove the error popup for the supported 29-bit ID engines and make the connection free of warnings.

Hello no I didn't disable it but I will check it again and I'll let you know

[misiakpb]

After this feedback I think I have to change the commands sequence to avoid the error after the 0100 request. This should remove the error popup for the supported 29-bit ID engines and make the connection free of warnings.

Hi admin, when we cant new version without popup?

[admin]

My apologize, I've been very busy for other problems in last 2 weeks.
I'm going to work on the app in next days, the changes have been already implemented, I need just some test before to publish.
I wanted to add an auto-select function reading from the ecu, but it requires more days so I decided to quickly publish an intermediate update to correct the popup and improve the init process for the BETA profile.

[admin]

Published release 3.40.12 right now