BETA test for 29bit init protocol

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

BETA test for 29bit init protocol

Post by admin » Sun Jul 21, 2024 3:16 pm

Hello guys
I've been waiting for months hoping to find a new TDI engine with the 29bit init protocol to expand the supported engine list, but I've been unlucky.

Now to unlock this stuck situation, I ask for your help.

In the new release 3.30.12 that I'm going to publish in days, you'll find the new engine protocol 97 that forces the 29bit protocol. At the moment I don't have a list of engines who use this protocol, but if you own a new VAG car, model year 2021 or newer, and VAG DPF doesn't work with it with any engine group, it probably has the 29bit init protocol. In this case, if you already own a good ELM327 adapter, you can try the new engine group 97 and give me a feedback.

Currently I'm completely blind, I added what I think is necessary to establish the communication, but I'm not able to test anything.
Any kind of feedback can be useful for me.

If you want to support this beta test, please answer this topic adding your engine data and the result of the test.
Thank you very much

wacholek
Posts: 8
Joined: Mon Aug 08, 2022 12:42 pm

Re: BETA test for 29bit init protocol

Post by wacholek » Mon Aug 12, 2024 11:29 pm

Hi,
I have acess to at least two new engiens. VW Tiguan DTRC and Skoda Octavia IV DTRD.
I can help you and test your program.
Best regards,
Chris

premium
Posts: 1
Joined: Tue Mar 12, 2024 7:27 am

Re: BETA test for 29bit init protocol

Post by premium » Thu Aug 15, 2024 5:50 pm

Hi. I have a Skoda Octavia IV, year 2021, DTTA engine. I am connecting using carista. At the moment I cannot connect the VAG DPF to the car. There was no problem with the Octavia III, I was satisfied. I can help with the beta version.

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Sun Aug 18, 2024 5:42 pm

Thanks, keep checking this topic for instructions when the new release will be published.

It will take about one week to close the pre-launch checks.

glowas
Posts: 13
Joined: Thu Jul 13, 2023 11:20 pm

Re: BETA test for 29bit init protocol

Post by glowas » Mon Aug 19, 2024 6:12 am

I own Octavia IV with DTUA engine, I can help as well.

eulogitos
Posts: 4
Joined: Wed Aug 23, 2023 5:55 pm

Re: BETA test for 29bit init protocol

Post by eulogitos » Mon Aug 19, 2024 2:20 pm

I have to buy the full version to test it or can I check it with the free version. I have a 2.0 tdi 2022 dttc

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Tue Sep 03, 2024 12:25 pm

I'm implementing the beta profile in both apps, but only the full app has the log file feature to save at least a short result of the connection.
In the free app I'm evaluating if it's the case to add a popup with the same information just to give you, and then to me, a feedback of what happens.

misiakpb
Posts: 27
Joined: Thu Nov 19, 2020 9:28 am

Re: BETA test for 29bit init protocol

Post by misiakpb » Tue Sep 10, 2024 7:45 pm

HI, the beta eta ?

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: BETA test for 29bit init protocol

Post by gusiak11 » Thu Sep 12, 2024 10:37 am

Hello colleagues
I have a 2022 Octavia with a DTUA engine, unfortunately setting the application to engine group 18 as my colleagues suggested did not work, V-gate cannot read the DPF settings
I hope that the release of version 3.30.12 will help with connection, when can we expect it to be published on Google Play?
unless you can download version 3.30.12 from a source other than GooglePlay

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Sun Sep 15, 2024 1:06 pm

Wait just few days, I'm in the pre-launch checks.
There are other new features and corrections that I need to test.

Probably the free app will be published some days after the full app.

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Thu Sep 19, 2024 6:28 pm

New release 3.31.12 published: you'll find the new group 97 that should work like all others, I hope.
Selecting it, the log file will contain more details about the initialization commands that can be useful for me to understand what happens in case of communication failure.

Let me know how it works.

In some days I'm publishing also the LITE app with a different logging method, probably a popup message, due to the fact that the LITE app can't save a log file.

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Sun Sep 22, 2024 12:05 am

Hello,

I have Skoda Kodiaq II (2024) with 2.0 TDI 142kW engine, code: DXNB

Today I tried the new beta 97 option/29bit protocol and the communication didn't work. For some reason there was no log saved even if it's allowed and configured accordingly, perhaps something to do with Android 14 and the root folder?

In any case, if it's of any use I'm adding screenshot with the error and pasting the text below as well:

---
Communication error

Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

**BETA-29bit-CANID**
415444GATDOK
41545043GATPCOK
41544530GATE0OK
41545330GOK
41544C30GOK
4154415431GOK
41544D30GOK
41544831GOK
4154535037GOK
---

If I can help any further don't hesitate to ask!
Attachments
Screenshot.png

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Sun Sep 22, 2024 6:22 pm

Thanks for the first feedback, I'm analyzing it.

The log file is written only if there is communication and reading of parameters, it's reason why I added the initialization log in the error message. It works as expected.

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Thu Sep 26, 2024 11:49 am

New release published right now with more details in the 29bit log.

Also the FREE app has been updated adding the same logging text in the popup error message.

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Thu Sep 26, 2024 2:30 pm

I did another test with new version of the app and same car/engine - Skoda Kodiaq II (2024) with 2.0 TDI 142kW engine code: DXNB - and attaching screenshot and text of the results (text is from OCR, I corrected whatever error I was able to spot but there might be some mistake left):

4154505046464F4646A0ATPPFFOFFOK12
41545AA0ATZELM327V14B12
415444A0ATDOK12
41545043A0ATPCOK12
41544530A0ATE0OK12
41545330A0OK12
41544C30A0OK12
4154415431A0OK12
41544D30A0OK12
41544831A0OK12
4154535037A0OK12
30313030D118DAF101064100981B801318
DAF102064100981A000142
30313030D118DAF101064100981B801318
DAF102064100981A000142
30313030D118DAF101064100981B801318
DAF102064100981A000142
30313030D118DAF101064100981B801318
DAF102064100981A000142
415453483137464330303736D0OK69
Attachments
Error.png

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Fri Sep 27, 2024 10:07 am

Helpful, I'm going to publish today an update of the Full app

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Fri Sep 27, 2024 2:00 pm

Did another test with updated version of the app and same car and attaching the current log.
Attachments
Log.jpg

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: Test BETA dla 29-bitowego protokołu init

Post by gusiak11 » Mon Sep 30, 2024 1:53 pm

Last Saturday I tried to connect to the DPF in my car Skoda Octavia 2022, DTUA engine
unfortunately, changing the settings from "read form ECU" to group 18 or 97 did not allow connection, program version 3.34.12

This message was displayed on the phone screen

Communication error
Unable to communicate with engine ECU even with OBD2 protocol.
Possible causes: ⁃ Car ignition off ⁃ ELM327 faulty or bad quality ⁃ Car not OBD2 compliant
**BETA-29bit-CANID**41 545050464
64F4646GOK 41 545AGELM327V23
415444GATDOK
41545043GATPCOK
41544530GATEOOK
41545330GOK
41544C30GOK
4154415431GOK
41544D30GOK
41544831GOK
4154535037GOK

User avatar
admin
Site Admin
Posts: 554
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Tue Oct 01, 2024 9:35 am

Did you try to scroll the error message or is it only that? It should contain some more lines.

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: BETA test for 29bit init protocol

Post by gusiak11 » Tue Oct 01, 2024 11:59 am

I didn't try to scroll, there should be close at the end of my entry
Unfortunately, the forum does not accept photos from Google's disk and I do not have any other server to publish photos (this is a screen scan taken by S23 and copied)
the next time I contact the car, I will try to check if there are any other lines in the error code.

Post Reply