Hello, is it possible to add support for engine DFMA? It is Seat Alhambra, year 2018, 2.0tdi 135kw.
Thank you.
Alhambra DFMA
Re: Alhambra DFMA
I don't have any comment or request about it, you're the first.
It isn't supported, but you can try the existing engine groups, probably with one of them you can read the parameters.
Pay attention to the adapter, the low cost dongles don't work with the app because they don't fully support the ELM327 and the canbus commands.
It isn't supported, but you can try the existing engine groups, probably with one of them you can read the parameters.
Pay attention to the adapter, the low cost dongles don't work with the app because they don't fully support the ELM327 and the canbus commands.
Re: Alhambra DFMA
Hi, I will refresh this thread. Is it possible to add support for this engine? My adapter is working well with VAG DPF lite, but it says it cannot find my engine group, so it will use some default values. I would like to use all the features in the paid app. Thanks.
If so, I would buy the app.
If so, I would buy the app.
Re: Alhambra DFMA
You can find the best engine group using the free app and then buy the full app if you're satisfied of the results.
If you find a group that reads all the parameters correctly, you can keep it selected as a custom group. There is no difference between the automatic selection and a custom selection if both point to the same group. Of course if the engine isn't officially supported, the automatic selection remains to the first group 0 that could be not the best for your engine.
If you find a group that reads all the parameters correctly, you can keep it selected as a custom group. There is no difference between the automatic selection and a custom selection if both point to the same group. Of course if the engine isn't officially supported, the automatic selection remains to the first group 0 that could be not the best for your engine.