Search found 238 matches

by admin
Mon May 03, 2021 5:57 pm
Forum: VAG DPF
Topic: More exhaust temperatures available?
Replies: 8
Views: 434

Re: More exhaust temperatures available?

Very new car 8-) I confirm, this engine heavily uses the 2 EGR valves, in fact in my experience the regenerations occur every about 250-300 km. Customizable fields is a possibility to add new values as well as a new page, but the big problem for me is to collect similar information from different en...
by admin
Mon May 03, 2021 2:35 pm
Forum: VAG DPF
Topic: More exhaust temperatures available?
Replies: 8
Views: 434

Re: More exhaust temperatures available?

I have DETA engine too ;) Yes it would be possibile to read canbus and obd protocol at the same time, but this solve only one of my limits .. the screen size is limited, I'd like to add more useful data, but I had to make a choice to select only the 12 most important values and to keep the app more ...
by admin
Mon May 03, 2021 10:46 am
Forum: VAG DPF
Topic: More exhaust temperatures available?
Replies: 8
Views: 434

Re: More exhaust temperatures available?

Interesting topic! What's your engine type? I know the regeneration process and I agree that there are many other parameters useful to understand what the engine is doing, but my main problems are the limited screen size and the differences between every VAG engine. Unfortunately, VAG doesn't have a...
by admin
Mon May 03, 2021 10:36 am
Forum: VAG DPF
Topic: What does this all mean?
Replies: 4
Views: 445

Re: What does this all mean?

There something strange in this picture, the soot mass calculated value clearly is impossible and also time/distance since las regen value are very high. Moreover if you report strange engine behaviors, I think there is something faulty in the system, but it's pretty impossibile to understand where ...
by admin
Mon May 03, 2021 10:18 am
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

In all the technical documentation I've found, I never read anything about the soot mass measured value. All diagnostic procedures refer to the soot mass calculated. Moreover the measured value gives weird data, sometimes negative and sometimes decreasing while the calculated value increases. The on...
by admin
Sat Apr 24, 2021 4:04 pm
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

It's difficult to know that. The soot mass calculated can be wrong if some sensor provides wrong data that make the entire calculation wrong. The ECU has internal diagnostic routines that give it information to understand if some sensor is faulty and consequently anticipates the regeneration. The su...
by admin
Sat Apr 24, 2021 10:50 am
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

This is usually a symptom of a failure in some sensor, but it's impossible to know which one using my app. You should ask for a full diagnostic check to an official service or to a good mechanic. Your log is another confirmation that the soot mass measured value becomes a real usable value when ther...
by admin
Fri Apr 23, 2021 9:26 am
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

Considering only March and April 2021, I see: a regeneration started with soot mass 21,36 grams and finished at 4,6 grams in the log "Save date(yyyy-MM-dd HH:mm:ss): 2021-03-20 15:21:03" a regeneration started with soot mass 21,66 grams and finished at 6,38 grams in the log "Save date(yyyy-MM-dd HH:...
by admin
Thu Apr 22, 2021 4:10 pm
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

Yes it is.

But I don't find any issue in it, every regeneration started with correct soot mass values.
This is the list of the soot mass values just before the regeneration starting:
log.jpg
Maybe the regeneration you mention weren't logged?
Do you remember the days when they happened?
by admin
Wed Apr 21, 2021 4:08 pm
Forum: VAG DPF
Topic: Sporadic connection errors
Replies: 1
Views: 182

Re: Sporadic connection errors

What kind of adapter are you using?

First suggestion is to set the update delay to 0, many cheap adapters don't like delays in the communication flow.
IF the problem persists, you can check if also with other applications you have the same disconnections.
by admin
Wed Apr 21, 2021 2:59 pm
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

These pictures are not useful because you can see the fields "distance since last regen" and "time since last regen" have already been reset after the regeneration completion.

The log file is usually saved in the "VAG_DPF" folder in the internal SD, if you didn't change it.
by admin
Wed Apr 21, 2021 8:24 am
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

I see you've enabled the logging, you can easily verify what was the time and distance since last regeneration before the process started.
Or you can share the log here if you want.

Can you confirm your engine didn't receive a software update?
by admin
Tue Apr 20, 2021 4:36 pm
Forum: VAG DPF
Topic: CAYC 1.6 TDI
Replies: 16
Views: 769

Re: CAYC 1.6 TDI

Have you checked what are the time and distance since last regen when the regeneration starts?

Today your engine starts to regenerate every time near 13 grams or it happens sometimes?
by admin
Tue Apr 20, 2021 8:11 am
Forum: New features request
Topic: 2012 Touareg CRCA , exhaust gas temperature
Replies: 13
Views: 661

Re: 2012 Touareg CRCA , exhaust gas temperature

Very good, thank you for your feedbacks and provided information.
by admin
Fri Apr 16, 2021 8:15 am
Forum: New features request
Topic: 2012 Touareg CRCA , exhaust gas temperature
Replies: 13
Views: 661

Re: 2012 Touareg CRCA , exhaust gas temperature

In last release I created a new group for CRCA engine with all working parameters. I decided to add input gas temperature and simulated DPF surface temperature.
Let me know if it works well
by admin
Mon Apr 12, 2021 11:55 am
Forum: VAG DPF
Topic: DPF Active regen wont start
Replies: 5
Views: 573

Re: DPF Active regen wont start

Something is clearly working wrong. I see little reductions in your pictures, but not enough to reduce the soot mass to the common value after regeneration. In this condition, the soot mass increases continuously and the DPF will be clogged soon. When the ECU detects a too high soot mass value, firs...
by admin
Mon Apr 12, 2021 11:50 am
Forum: About this Forum
Topic: How to answer applagapp.com ??
Replies: 1
Views: 569

Re: How to answer applagapp.com ??

There is the answer button in every topic, then, for the first 3 messages of a new user, I have to approve them.
by admin
Tue Apr 06, 2021 5:09 pm
Forum: VAG DPF
Topic: DPF Active regen wont start
Replies: 5
Views: 573

Re: DPF Active regen wont start

Was the regeneration finished? You can verify this checking the regen duration value, it change to 0 when finished.
And the soot mass should be between 2 and 8 grams.
by admin
Mon Apr 05, 2021 10:41 am
Forum: VAG DPF
Topic: Refresh isn't possible
Replies: 2
Views: 237

Re: Refresh isn't possible

You have 2 ways to enable the automatic data update: tap in the DPF image or enable the data auto-update function after connecting in the options menu.
When you see green arrows in the DPF image, the function is active.

Let me know if it works.
by admin
Sat Apr 03, 2021 5:45 pm
Forum: VAG DPF Free
Topic: New engine type?
Replies: 6
Views: 614

Re: New engine type?

I don't have data about your engine and no reports from users. If no engine groups works with it, I can assume it's similar to the new TDI engines launched with Golf 8 etc that have a new diagnostic setup. I'm working to make these new engines compatible, but I need to have a car to be tested and I'...