ApplagApp Forum

So , I had some time for testing . Everything works fine , I've seen that you finally opted for an ECU calculated value for the DPF surface temperature , the IDE 04653 , which is basically following the DPF input temperature minus some assumed corrections. Makes sense , taking into consideration the...

JUst returned from a long trip...Without knowing it. I'll give it a try this weekend. Grazie.

Dear A, I'm happy that together we were able to clarify this engineering solution . I'm 100 % sure about the EGR reading as I confronted it with the VCDS scan. Just for double checking I had a test today again and the EGR ( both high and low ) is reaching 100 % during WOT ( wide open throttle ) whil...

Dear Admin , Thanks for the extra info. Just to be on the same side : I'm not challenging you, as your knowledge is far better on this field ( the proof is your app ) . The information on the VW group engines is very disseminated and often contradictory . I was aware of the SSP495 , however I believ...

Dear Admin , I understand your legit doubt . I had the same . But... I was unlucky to remove completely the exhaust system so I have some experience on my car now. 1. Searching ElsaWin for my car type, the term "exhaust gas temperature" is listing only two sensors G235 and G495.(see pic.) 2. Just to...

Dear Admin ( would be nice to know your name )... Thank you first for your good job , then thx for the quick reply . I was not really keen on knowing the EGR cycle value , but indeed the value it is not present on the generic Group 0. Instead the EGR reading is properly matched in the Groups : 1,2,3...

Dear all , I've bought your very useful app and use it because it is very light and quick to use ,though I couldn't match properly the engine group . My problem is that accordingly to my own exploration , and to Elsawin my car has only two exhaust gas temperature sensors although there are Touareg w...