ApplagApp Forum

Ok course, everything can help.

Send it to applagapp@gmail.com

Thanks!

So it's related to the adapter itself.
Unfortunately the APP now doesn't implement the bluetooth pairing function, so that adapter cannot be used.

Interesting, I didn't know some adapters couldn't connect directly to some smartphone.
It's probably something related to the smartphone bluetooth stackup that's usually customized by the smartphone manufacturer.

I know the message is still present in last release, I'm going to fix it.

An important news is that in 2-3 weeks I'm going to analyze a DXPA engine with 29bit init protocol.
A friend finally decided to buy it

With that data I should create an official engine group, removing the BETA statement.

Have you found those parameters in VCDS for your engine?

Huge amount of details! Thanks for sharing. In many cases we (in general) can't be sure if a value is within the specified range and considered ok or not. For example your diff pressure or the injected fuel. Without the design specs we don't have a real reference to evaluate, but sometimes comparing...

Il motore DTRD funziona senza problemi con diverse persone con gruppo motore 18 o 97 a seconda dell'anno di produzione e della versione software. Nel tuo caso, che adattatore OBD hai utilizzato? Non ti posso garantire che funzioni al 100%, ma nel dubbio ti consiglierei di provare con un adattatore d...

Thanks for the hyper detailed post, it isn't common on the web and I'm sure it can help many other users. About your question on the soot charging rate, it's calculated by the app and it isn't coming from the ecu. Its very high number depends on the soot mass calculated value that can jump from a lo...

Good!

I'm working to remove that annoying error that seems to be irrelevant for the app to function, at least with new engines with 29bit init.

Based on your log, it seems you didn't use the group 97 BETA. Can you confirm?

In the app you can select an engine group, no a single engine code. This because many engines share the same diagnostic setup so I've grouped them. If you select a group not suitable for your engine, you simply have "nd" values in the fields, but you risk nothing because for a request of a missing p...

No it doesn't.

OBDeleven adapter works only with OBDeleven app. They've decide to limit its usage to the official app only, so it isn't an ELM327 compatible device and can't be used with any other app.

It means that no answer comes from the ECU, for any request.

If it was working and suddenly stopped to work, I think it's an hardware failure in the OBD adapter. Maybe try it with another app to confirm.

From the screenshot of Milos, the group is 18. You can see it on top right, it's the green number.

Anyway you can try all engine groups and choose the best for you, it's a procedure that takes just some minutes.

Have you been able to read DPF parameters with CarScanner?

It behaves the same way in my Škoda Kodiaq II 2024, there is always error message at the start but then everything works just fine. I think this was introduced with one of the previous versions as in the beginning when the 29-bit protocol was first introduced there was no error message at the start...

On my Ford Tourneo Connect 2025 (which is exactly a rebranded VW Caddy V with MQB-EVO platform and DXR motorcode) the 29bit protocol works, I can see the date even if when I connect I always receive the error message of OBD protocol not established. But then just close message and it works. Log att...

Did you try all available engine groups in the app options? Also the 97 BETA group? Unknown engines can't be assigned to the correct engine group, so the app uses the first group in the list that is the 0. Of course if can be the wrong one for the engine, so you need to change the group and try if u...

Can you send me some logs with the diff pressure inside? With and without regeneration active, if possible. I need to understand if the value is correct before to add it, I can't add only because it seems ok. I decided to limit the parameters to 12 to have all of them available on screen. If you wan...

I got an audi a3 8v 2015 sportback 2.0tdi crlb motor 216. 000k km before 5 months started to regenerate every 100/150km till 30/50km i went to garage and they told me that nox sensor had a problem they changed it and now it regenerates after 300km but i saw on vag dpf they reset the value from oil ...