Search found 352 matches

by admin
Tue Oct 04, 2022 4:09 pm
Forum: VAG DPF
Topic: Audi A3 8v CRLB - soot mass measured
Replies: 3
Views: 44

Re: Audi A3 8v CRLB - soot mass measured

Glad to see you solved faster than me :D
by admin
Sun Oct 02, 2022 2:04 pm
Forum: VAG DPF
Topic: 2.0 TDI CRLB frequent regeneration
Replies: 12
Views: 1103

Re: 2.0 TDI CRLB frequent regeneration

You can only verify when the user reads the message checking if it moves from "outbox" to "sent" folder in your private message page.
by admin
Fri Sep 30, 2022 5:14 pm
Forum: VAG DPF
Topic: 2.0 TDI CRLB frequent regeneration
Replies: 12
Views: 1103

Re: 2.0 TDI CRLB frequent regeneration

You can find his email clicking on the username to open the user details.
by admin
Sun Sep 04, 2022 6:10 pm
Forum: ELM327 Identifier
Topic: ELM 327
Replies: 10
Views: 5466

Re: ELM 327

The crackers learn and change consequently ...
by admin
Wed Aug 31, 2022 5:19 pm
Forum: VAG DPF
Topic: DPF failing to regen and output gas temperature question
Replies: 5
Views: 198

Re: DPF failing to regen and output gas temperature question

It could be a sensor in a different position versus other engines and this can be the reason of lower values. But this is only an hypothesis, let me check if I have detailed information about your engine.
by admin
Tue Aug 30, 2022 10:49 pm
Forum: VAG DPF
Topic: High Press EGR Closing (%) showes unplausible value
Replies: 9
Views: 494

Re: High Press EGR Closing (%) showes unplausible value

I need also the 4-digit SW number that you can see after the VAG code in the app. Thanks
by admin
Tue Aug 30, 2022 10:47 pm
Forum: VAG DPF
Topic: How to reduce oid ash residue
Replies: 1
Views: 163

Re: How to reduce oid ash residue

The only way is dismounting and cleaning the filter.
Or replacing it, of course.

The oil ash can't be reduced during the normal engine operation, neither with the high temperature of the regeneration phase.

More or less, it will reach the 100% tolerated value in 250-300k km. This is the filter life.
by admin
Tue Aug 30, 2022 10:42 pm
Forum: VAG DPF
Topic: DPF failing to regen and output gas temperature question
Replies: 5
Views: 198

Re: DPF failing to regen and output gas temperature question

First we have to understand which is the right output gas temperature sensor read by the app, because in the exhaust line there can be many temp sensors and not always the same in between different engines. Usually I try to find the sensors as close as possibile to the DPF, but it couldn't be near t...
by admin
Fri Aug 26, 2022 11:18 pm
Forum: New features request
Topic: Soot Mass Measured not visible
Replies: 3
Views: 138

Re: Soot Mass Measured not visible

I don't have a detailed database of each engine. Many of those present in the list have been tested by users with an existing setup for another engine, if they've found all parameters read correctly, the I added the new engine to the engine group. To find the correct "soot mass measured" for your en...
by admin
Fri Aug 26, 2022 10:11 am
Forum: New features request
Topic: Soot Mass Measured not visible
Replies: 3
Views: 138

Re: Soot Mass Measured not visible

Usually the soot mass measured gives useless (for us) values because totally unrelated to the normal soot growth and often negative (confirmed using the official VAG tool). This is the reason why in the first releases of the app I skipped that value, but then many users asked me to introduce it beca...
by admin
Tue Aug 23, 2022 4:10 pm
Forum: VAG DPF
Topic: High Press EGR Closing (%) showes unplausible value
Replies: 9
Views: 494

Re: High Press EGR Closing (%) showes unplausible value

No problem, I can.

To configure the app, I need to understand the ECU SW code to set the correct engine group automatically.

Can you send me a screenshot of the app connected and running? At the bottom there is the information I need.
by admin
Mon Aug 08, 2022 1:50 pm
Forum: VAG DPF
Topic: Help with DPF report
Replies: 1
Views: 167

Re: Help with DPF report

Usually a big jump in the soot mass calculated is related to a differential pressure sensor failure. It's only a statistic. Of course the app can't be used as a diagnostic tested to obtain the exact reason of the failure, but you can start with that sensor, it's the first check that usually is done....
by admin
Thu Aug 04, 2022 8:19 am
Forum: VAG DPF
Topic: High Press EGR Closing (%) showes unplausible value
Replies: 9
Views: 494

Re: High Press EGR Closing (%) showes unplausible value

The values are always implausible, but before March they was fine? Correct?

You can try every engine group, if you find correct EGR values in some of them, I can create a new group for your (apparently) different CXHA engine type.
by admin
Tue Aug 02, 2022 5:15 pm
Forum: VAG DPF
Topic: High Press EGR Closing (%) showes unplausible value
Replies: 9
Views: 494

Re: High Press EGR Closing (%) showes unplausible value

No changes in group 13. I've only introduced the group 15 for some CXHA engines that have a bigger filter with higher limits, but the parameter requests are the same.

Ate the values always implausible or just sometimes?
by admin
Fri Jul 15, 2022 9:21 pm
Forum: VAG DPF
Topic: Dpf app after remap
Replies: 1
Views: 228

Re: Dpf app after remap

EGR is working, otherwise you would see a fixed value (usually 100 meaning EGR closed electronically). To check if it's working fine you can fully depress the accelerator pedal and see if the EGR value remains constantly at 100% value. A possibility is that the EGR has been closed mechanically, but ...
by admin
Fri Jul 15, 2022 9:12 pm
Forum: VAG DPF
Topic: Some values reading zero
Replies: 1
Views: 158

Re: Some values reading zero

What's your engine code?

Also a screenshot could help
by admin
Sun Jun 12, 2022 12:08 am
Forum: VAG DPF
Topic: Different Infomation in Liter vs. gramm about Oil Ash Residue
Replies: 5
Views: 1310

Re: Different Infomation in Liter vs. gramm about Oil Ash Residue

good!

how many kms between regenerations?
by admin
Sun Jun 12, 2022 12:05 am
Forum: VAG DPF
Topic: No data for VAG BRT engine?
Replies: 1
Views: 182

Re: No data for VAG BRT engine?

The app works only with the last diagnostic protocol and your engine uses the old one.
This is the reason why it doesn't work.
by admin
Sun Jun 12, 2022 12:01 am
Forum: New features request
Topic: iOS support
Replies: 6
Views: 2442

Re: iOS support

The problem is the lack of time, I can't spend so much time for development, test and debug.
by admin
Fri Jun 10, 2022 10:10 am
Forum: New features request
Topic: iOS support
Replies: 6
Views: 2442

Re: iOS support

Still no plan, sorry.

I don't think it will happen, at least in the near future.