Search found 483 matches

by admin
Sun Jul 21, 2024 3:16 pm
Forum: VAG DPF
Topic: BETA test for 29bit init protocol
Replies: 0
Views: 163

BETA test for 29bit init protocol

Hello guys I've been waiting for months hoping to find a new TDI engine with the 29bit init protocol to expand the supported engine list, but I've been unlucky. Now to unlock this stuck situation, I ask for your help. In the new release 3.30.12 that I'm going to publish in days, you'll find the new ...
by admin
Sat Jun 29, 2024 5:44 pm
Forum: New features request
Topic: VW Tiguan 2021 2.0 TDI - dual SCR system
Replies: 1
Views: 128

Re: VW Tiguan 2021 2.0 TDI - dual SCR system

mmm ok dual SCR and dual EGR, but dual DPF I think you're wrong. I didn't see a system with 2 DPF.
by admin
Wed May 29, 2024 11:02 am
Forum: VAG DPF
Topic: VW Touareg III 3.0d DENA
Replies: 6
Views: 2028

Re: VW Touareg III 3.0d DENA

Group 0 (auto-read) seems the best one. Regen duration isn't available, but it's the same for the other groups, probably this parameter has a different pid or it isn't available to read. Other groups don't let you read any value? Using the group 0 you should give a check to the values to undestand i...
by admin
Wed May 29, 2024 10:24 am
Forum: VAG DPF Free
Topic: SUPPORTO YARIS 2009
Replies: 1
Views: 476

Re: SUPPORTO YARIS 2009

Il problema semplicemente è che l'app funziona solo con auto del grupp VAG (Volkswagen Audi Group) come chiaramente scritto nella descrizione stessa.

ciao
by admin
Sun May 12, 2024 7:47 pm
Forum: VAG DPF
Topic: Motor DPCA
Replies: 10
Views: 4312

Re: Motor DPCA

I've had the opportunity to connect a VCDS tester to a gasoline engine for some kms and in my opinion an app to check the GPF is useless. The soot mass seems to stay always near a fixed value, it doesn't increase linearly to reach the regen limit like in a TDI engine. Sometimes it decreases a little...
by admin
Sun May 12, 2024 7:37 pm
Forum: VAG DPF
Topic: DEZE support
Replies: 1
Views: 389

Re: DEZE support

It's not a simple task like save a log in your device. It's required at least an expensive can analyzer, but also a minimum knowledge about how to log useful values instead of useless bytes.
by admin
Sun May 12, 2024 7:28 pm
Forum: New features request
Topic: CBD engine code
Replies: 1
Views: 533

Re: CBD engine code

Yes it's possible, but not with VAG DPF.
The official diagnostic tester can read the DPF values, as well as the VCDS software, but they are softwares for windows.
For android I think OBDeleven can read those parameters, but I'm not sure with old engines.
by admin
Sun May 12, 2024 7:24 pm
Forum: VAG DPF
Topic: VW Touareg III 3.0d DENA
Replies: 6
Views: 2028

Re: VW Touareg III 3.0d DENA

Can you post here the screenshot of the working groups? Maybe I can find what value is correct and what is wrong.
by admin
Sun May 12, 2024 7:22 pm
Forum: VAG DPF Free
Topic: DFBA engine suport
Replies: 1
Views: 540

Re: DFBA engine suport

It isn't officially supported because I've received only 1 feedback, but it was positive using the engine group 18. Usually I wait for 3-4 positive feedbacks before to add the new engine. You can try using the free app setting the group 18 in the options. If it works also for you, it's another posit...
by admin
Sun Apr 28, 2024 11:45 am
Forum: VAG DPF
Topic: VW Touareg III 3.0d DENA
Replies: 6
Views: 2028

Re: VW Touareg III 3.0d DENA

Unfortunately I don't have any feedback about this engine. You should try by yourself with the free app. You can use bluetooth or wifi adapter, but I advise the bluetooth version because I've seen in the past that wifi adapters quality is very low, probably due to their low diffusion in the market. ...
by admin
Fri Apr 05, 2024 9:54 am
Forum: New features request
Topic: EGR
Replies: 1
Views: 921

Re: EGR

Hi, first I need to know your engine code and if you're using a custom engine group. not all engines have been tested, many of them have been added after good feedbacks from users, but I've added also engines with partial support and not all parameters available. With the engine code I can give you ...
by admin
Wed Mar 27, 2024 3:40 pm
Forum: VAG DPF
Topic: Is it compatible with CVUB?
Replies: 4
Views: 2295

Re: Is it compatible with CVUB?

There are 2 possibilities: your OBD adapter doesn't fully support canbus protocol so it can't work with the app your engine has a different diagnostic setup with different software version so it isn't compatible with any engine group in the app To try to solve the first point, you should try a good ...
by admin
Wed Mar 27, 2024 3:35 pm
Forum: VAG DPF Free
Topic: DTUA Suport
Replies: 11
Views: 7455

Re: DTUA Suport

Hi, I added the english translation to your message. If you used the same obd adapter for both engines, this means that the adapter can work with canbus diagnostic, so the problem is the unsupported initialization protocol that last TDI engines have. Unfortunately I didn't have the opportunity to an...
by admin
Wed Mar 27, 2024 3:15 pm
Forum: VAG DPF Free
Topic: CBDC engine support
Replies: 2
Views: 1604

Re: CBDC engine support

Hi, you can't connect because your engine isn't supported. It uses an old diagnostic protocol while the app works only with the last one introduced approximately in 2010-2011.
by admin
Fri Mar 08, 2024 12:14 pm
Forum: VAG DPF
Topic: 2020 2.0 TDi EVO Engines support
Replies: 17
Views: 10109

Re: 2020 2.0 TDi EVO Engines support

Your ECU probably has the new 29bit initialization protocol that the app doesn't support.
by admin
Fri Mar 08, 2024 12:13 pm
Forum: VAG DPF
Topic: Can I use VAG DPF with Engine CRTC 3.0 Tdi ?
Replies: 3
Views: 1440

Re: Can I use VAG DPF with Engine CRTC 3.0 Tdi ?

I can't tell you that it will certainty work, because to do it it'd test that engine directly with my instruments, and I don't know if I'll have this opportunity. The only advise I can give you is to try with a good adapter, to discard the possibility that it could be the reason of the failed connec...
by admin
Fri Mar 08, 2024 12:06 pm
Forum: VAG DPF
Topic: Unable to connect
Replies: 4
Views: 2389

Re: Unable to connect

What's your device brand? I received many feedback about chinese brands like Xiaomy and Huawei that not working with the app when different devices, while using same adapter and sme car, everything works fine. After some investigation in the past, I found that those brands often customize the blueto...
by admin
Fri Mar 08, 2024 11:59 am
Forum: OBD2 Adapters
Topic: OBDeleven
Replies: 1
Views: 2017

Re: OBDeleven

I know but the problem is that OBDeleven adapter is made to work only with their app.
That adapter isn't an ELM327 compatible device, so it cannot work with other apps using ELM instructions.

I can't do anything, I'm sorry.
by admin
Fri Mar 08, 2024 11:58 am
Forum: New features request
Topic: Communication error
Replies: 1
Views: 1106

Re: Communication error

Old story ... Torque and many other apps use the OBD protocol that communicate using only 2 bytes instead of the full 7 bytes length of the ISO CANBUS protocol. My app, and all the official diagnostic testers, uses the full protocol and requires a good quality adapter. Most of the low cost adapters ...
by admin
Fri Mar 08, 2024 11:53 am
Forum: VAG DPF
Topic: Is it compatible with CVUB?
Replies: 4
Views: 2295

Re: Is it compatible with CVUB?

It isn't officially supported because I didn't have the opportunity to read it with my instruments. But I received a partially positive feedback from an user that has been able to read almost all parameters setting the engine group 16. After that feedback I didn't receive any other comment, so I can...