Search found 481 matches
- Wed May 29, 2024 11:02 am
- Forum: VAG DPF
- Topic: VW Touareg III 3.0d DENA
- Replies: 5
- Views: 1041
Re: VW Touareg III 3.0d DENA
Group 0 (auto-read) seems the best one. Regen duration isn't available, but it's the same for the other groups, probably this parameter has a different pid or it isn't available to read. Other groups don't let you read any value? Using the group 0 you should give a check to the values to undestand i...
- Wed May 29, 2024 10:24 am
- Forum: VAG DPF Free
- Topic: SUPPORTO YARIS 2009
- Replies: 1
- Views: 25
Re: SUPPORTO YARIS 2009
Il problema semplicemente è che l'app funziona solo con auto del grupp VAG (Volkswagen Audi Group) come chiaramente scritto nella descrizione stessa.
ciao
ciao
- Sun May 12, 2024 7:47 pm
- Forum: VAG DPF
- Topic: Motor DPCA
- Replies: 10
- Views: 2910
Re: Motor DPCA
I've had the opportunity to connect a VCDS tester to a gasoline engine for some kms and in my opinion an app to check the GPF is useless. The soot mass seems to stay always near a fixed value, it doesn't increase linearly to reach the regen limit like in a TDI engine. Sometimes it decreases a little...
- Sun May 12, 2024 7:37 pm
- Forum: VAG DPF
- Topic: DEZE support
- Replies: 1
- Views: 155
Re: DEZE support
It's not a simple task like save a log in your device. It's required at least an expensive can analyzer, but also a minimum knowledge about how to log useful values instead of useless bytes.
- Sun May 12, 2024 7:28 pm
- Forum: New features request
- Topic: CBD engine code
- Replies: 1
- Views: 96
Re: CBD engine code
Yes it's possible, but not with VAG DPF.
The official diagnostic tester can read the DPF values, as well as the VCDS software, but they are softwares for windows.
For android I think OBDeleven can read those parameters, but I'm not sure with old engines.
The official diagnostic tester can read the DPF values, as well as the VCDS software, but they are softwares for windows.
For android I think OBDeleven can read those parameters, but I'm not sure with old engines.
- Sun May 12, 2024 7:24 pm
- Forum: VAG DPF
- Topic: VW Touareg III 3.0d DENA
- Replies: 5
- Views: 1041
Re: VW Touareg III 3.0d DENA
Can you post here the screenshot of the working groups? Maybe I can find what value is correct and what is wrong.
- Sun May 12, 2024 7:22 pm
- Forum: VAG DPF Free
- Topic: DFBA engine suport
- Replies: 1
- Views: 164
Re: DFBA engine suport
It isn't officially supported because I've received only 1 feedback, but it was positive using the engine group 18. Usually I wait for 3-4 positive feedbacks before to add the new engine. You can try using the free app setting the group 18 in the options. If it works also for you, it's another posit...
- Sun Apr 28, 2024 11:45 am
- Forum: VAG DPF
- Topic: VW Touareg III 3.0d DENA
- Replies: 5
- Views: 1041
Re: VW Touareg III 3.0d DENA
Unfortunately I don't have any feedback about this engine. You should try by yourself with the free app. You can use bluetooth or wifi adapter, but I advise the bluetooth version because I've seen in the past that wifi adapters quality is very low, probably due to their low diffusion in the market. ...
- Fri Apr 05, 2024 9:54 am
- Forum: New features request
- Topic: EGR
- Replies: 1
- Views: 622
Re: EGR
Hi, first I need to know your engine code and if you're using a custom engine group. not all engines have been tested, many of them have been added after good feedbacks from users, but I've added also engines with partial support and not all parameters available. With the engine code I can give you ...
- Wed Mar 27, 2024 3:40 pm
- Forum: VAG DPF
- Topic: Is it compatible with CVUB?
- Replies: 4
- Views: 1570
Re: Is it compatible with CVUB?
There are 2 possibilities: your OBD adapter doesn't fully support canbus protocol so it can't work with the app your engine has a different diagnostic setup with different software version so it isn't compatible with any engine group in the app To try to solve the first point, you should try a good ...
- Wed Mar 27, 2024 3:35 pm
- Forum: VAG DPF Free
- Topic: DTUA Suport
- Replies: 11
- Views: 5993
Re: DTUA Suport
Hi, I added the english translation to your message. If you used the same obd adapter for both engines, this means that the adapter can work with canbus diagnostic, so the problem is the unsupported initialization protocol that last TDI engines have. Unfortunately I didn't have the opportunity to an...
- Wed Mar 27, 2024 3:15 pm
- Forum: VAG DPF Free
- Topic: CBDC engine support
- Replies: 2
- Views: 1224
Re: CBDC engine support
Hi, you can't connect because your engine isn't supported. It uses an old diagnostic protocol while the app works only with the last one introduced approximately in 2010-2011.
- Fri Mar 08, 2024 12:14 pm
- Forum: VAG DPF
- Topic: 2020 2.0 TDi EVO Engines support
- Replies: 17
- Views: 8414
Re: 2020 2.0 TDi EVO Engines support
Your ECU probably has the new 29bit initialization protocol that the app doesn't support.
- Fri Mar 08, 2024 12:13 pm
- Forum: VAG DPF
- Topic: Can I use VAG DPF with Engine CRTC 3.0 Tdi ?
- Replies: 3
- Views: 843
Re: Can I use VAG DPF with Engine CRTC 3.0 Tdi ?
I can't tell you that it will certainty work, because to do it it'd test that engine directly with my instruments, and I don't know if I'll have this opportunity. The only advise I can give you is to try with a good adapter, to discard the possibility that it could be the reason of the failed connec...
- Fri Mar 08, 2024 12:06 pm
- Forum: VAG DPF
- Topic: Unable to connect
- Replies: 4
- Views: 1711
Re: Unable to connect
What's your device brand? I received many feedback about chinese brands like Xiaomy and Huawei that not working with the app when different devices, while using same adapter and sme car, everything works fine. After some investigation in the past, I found that those brands often customize the blueto...
- Fri Mar 08, 2024 11:59 am
- Forum: OBD2 Adapters
- Topic: OBDeleven
- Replies: 1
- Views: 1514
Re: OBDeleven
I know but the problem is that OBDeleven adapter is made to work only with their app.
That adapter isn't an ELM327 compatible device, so it cannot work with other apps using ELM instructions.
I can't do anything, I'm sorry.
That adapter isn't an ELM327 compatible device, so it cannot work with other apps using ELM instructions.
I can't do anything, I'm sorry.
- Fri Mar 08, 2024 11:58 am
- Forum: New features request
- Topic: Communication error
- Replies: 1
- Views: 791
Re: Communication error
Old story ... Torque and many other apps use the OBD protocol that communicate using only 2 bytes instead of the full 7 bytes length of the ISO CANBUS protocol. My app, and all the official diagnostic testers, uses the full protocol and requires a good quality adapter. Most of the low cost adapters ...
- Fri Mar 08, 2024 11:53 am
- Forum: VAG DPF
- Topic: Is it compatible with CVUB?
- Replies: 4
- Views: 1570
Re: Is it compatible with CVUB?
It isn't officially supported because I didn't have the opportunity to read it with my instruments. But I received a partially positive feedback from an user that has been able to read almost all parameters setting the engine group 16. After that feedback I didn't receive any other comment, so I can...
- Fri Mar 08, 2024 11:48 am
- Forum: VAG DPF
- Topic: Charge rating reference & log
- Replies: 1
- Views: 720
Re: Charge rating reference & log
Charge rating reference is the value corresponding to the limit at which the ECU should trigger the regeneration. It's called "field regeneration limit", that's the standard regeneration for TDI engines. The purpose of that option is to customize the limit in case your DPF has different value than w...
- Fri Mar 08, 2024 11:41 am
- Forum: VAG DPF
- Topic: hidden value of soot ?
- Replies: 4
- Views: 7155
Re: hidden value of soot ?
The Nox value can give you the information that the ECU is triggering a quick regeneration to reduce them. It happens usually when the soot mass isn't high enough to launch the standard regeneration. Without this value you could see temperatures raising and high post injection values, withou an appa...